Documentation

User manual

Manual version v1.0.6, covering the software's interface and workflow.

Quick start

1. Install

1. Windows: double-click CPE-AutoTestTool-Setup-<version>.exe. Installation takes a few seconds and needs no administrator rights; a “CPE Auto Test Tool” icon appears on the desktop.
   macOS: double-click CPE-AutoTestTool-<version>-macOS.dmg, drag “CPE自动测试工具” into the Applications folder, then open it from Launchpad or Applications (Google Chrome, or Edge / Brave, must be installed).
2. If Windows shows “unrecognized publisher”, click More info → Run anyway; the Mac version is signed and notarized and shows no such warning.
3. The download page lists a SHA-256 value you can use to verify the installer.

2. First launch: accept the terms and activate

1. Read the terms (scroll to the end and tick “I have read and agree” before Agree & continue becomes available).
2. Enter your license code (you can paste the whole code; it is case-insensitive) and click Activate. A code can be activated once and is bound to this PC; you don't need to activate again.

3. Connect and test

1. Connect the CPE to the PC with a cable and click Connect. Model, IP, firmware and live signal appear once connected.
2. In Test settings choose the network mode (4G / SA / NSA) and fill in title, place and notes if you like.
3. Pick an angle and click Start; turn on auto-rotate to run through all four angles.
4. When the test unit is done, plug in the reference unit, select its card, connect and repeat the same steps.

4. Build the report

1. In the Report area of the left sidebar click Generate report to get Excel and PDF files; a detailed report can be exported too. Click a file name to open it.

Three things before you test

• Test over a wired adapter: let the PC go online only through that cable (turn Wi-Fi off) and close bandwidth-heavy programs for stable results.
• Use the same test server for both units: keep the default “Auto” — the server is pinned after the first test.
• Closing the window quits the app: don't close it while a test or report is running.

Shortcuts

• Ctrl+S / ⌘S — save a restore point
• Ctrl+Z / Ctrl+Y (⌘Z / ⌘Y) — undo / redo

Where data is stored

One folder per test, containing the test data and generated reports. Windows: %LOCALAPPDATA%\CPEAutoTest\data\runs\; macOS: ~/Library/Application Support/CPEAutoTest/data/runs/.